International Harvester / Farmall Cub Lo-Boy Parts

[Categories]   [All Cub Lo-Boy Parts]   [All Farmall Models]  

Clutch Alignment Tool - 15/16 inches x 10 spline. For model Cub, Cub Lo-Boy. (Item #: 114935, Ref: 900151) $8.10
Clutch Disc - For Cub, Cub Lo-Boy, Pacer, Pony. (Rockford Style Clutch) 6-1/2 inch diameter, 15/16 inch hub, 10 spline, organic lining. (Item #: 113818, Ref: 351773R91) $34.20
Clutch Housing Inspection Cover - This Clutch Housing Inspection Cover fits Cub, and Cub Lo-Boy. Replaces: 351485R2 (Item #: 126138, Ref: 351485R2) $28.30
Clutch Kit - Carbon Release Bearing - For International / Farmall tractor model Cub (Lo-Boy), Replaces International OEM number 251266R1, 350921R11, 351760R91, 351773R91, Clutch Diameter - 6-1/2', Clutch Hub Diameter - 15/16", Clutch Splines - 10, Clutch Center - Solid, Clutch Type - Woven, Pressure Plate Size - 6-1/2', Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, Pilot Bushing, Release Bearing (carbon) and Pilot Tool included, For Pressure Plate use Item #: 114935, (Item #: 118503) $117.00
Clutch Release Yoke Pivot Pin - This Clutch Release Yoke Pivot Pin has a 0.373 inch diameter and 5.695 inch length. It is made from improved 4140 steel. It fits Cub and Cub Lo-Boy and replaces original part number 350948R1. (Item #: 126163, Ref: 350948R1) $17.90
Clutch Release Yoke, Pair - Right and left hand sides. For tractor models: Cub above SN# 32229 and Cub Lo-Boy. Replaces 353240R2, 353239R2. (Item #: 126164, Ref: 3532LR) $49.50
Clutch Release, Yoke (Left Hand) - Fits Cub above serial number 32229 and Cub Lo-Boy. (Item #: 172558, Ref: 353239R2) $19.40
Clutch Release, Yoke (Right Hand) - Fits Cub above serial number 32229 and Cub Lo-Boy. (Item #: 172560, Ref: 353240R2) $18.10
Clutch Shaft and Transmission Spline Shaft with Bushing - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces International OEM number 351534R21, Does Not Fit 154, 184, 185, Length 42-1/4", (Item #: 126166) $130.00
Clutch disc - 5 1/2 inch new clutch disc, Spline DIAMETER: 0.9375 inch, spline COUNT : 10. Fits Cub Lo-Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 154346, Ref: 404640R93) $30.00
Pressure Plate - This Pressure Plate is used on models Cub, Cub Lo-Boy. Pressure Plate Assembly: 6 1/2 inch, 3 fingers, 6 spring, cast plate. Verify diameter. (Item #: 122626, Ref: 351760R91) $89.00
Pressure Plate Assembly - For International / Farmall tractor models Cub (154), Cub Lo-Boy, Cub 154, Cub 184, Cub 185, Replaces International OEM number 404639, 404639R94, 84358395, GV73340028, Pressure Plate Size: 5-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Flywheel Step: Flat, (Item #: 154344) $90.00
Release Bearing, Original Style - 1.250 inch inside diameter. For Cub, Cub Lo-Boy. Clutch Release Bearing. (Graphite) (Item #: 118645, Ref: 350921R11-OE) $38.30
Release bearing - NOT Graphite - Release Bearing, With New and Improved Automotive Style Roller (Thrust) Bearing, not fixed graphite like original. For tractor models Cub, Cub Lo-Boy. (Item #: 121968, Ref: 350921R11) $59.00
Remanufactured Pressure Plate - Remanufactured Pressure Plate: 5 1/2 inches with 3 springs. Fits Cub Lo-Boy, Cub 154-Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 206062, Ref: 404639-R) $99.01
Universal Parts and Accessories Category: Clutch
Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $2039.01
Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1084.94